Mission Viejo, CA (November 26, 2013) - Holt Integrated Circuits expands its discrete-to-digital portfolio with the introduction of HI-8437, a 3.3V, 32-channel, discrete-to-digital sensing IC with SPI interface and low threshold sensing capability. The high impedance sense input thresholds and hysteresis are programmable via the 20MHz SPI port in 100mV steps, from 0.4V to 5.2V and all 32 sense output states may be read with a single SPI command. In addition, the device has built-in lightning protection on the sense inputs.
The 32 sensing channels are divided into four banks of 8 inputs, with each bank independently configurable over the SPI port. Customers may easily implement a 32-channel solution using a single device, or increase the number of sense channels on a single SPI port by addressing multiple HI-8437 devices by their individual chip selects.
This device is similar to Holt’s recently announced HI-8436, except the sense inputs are high impedance and internally pulled to ground through a 400kOhm resistor.
“Holt offers a full portfolio of discrete-to-digital sensing ICs,” said George Noh, Director of Sales and Marketing at Holt. “These devices greatly simplify analog sensor interfaces, often replacing multiple discrete components with a single IC.”
The device is available in industrial −40oC to +85oC and extended −55oC to +125oC temperature ranges and comes in multiple standard package options, including 44 pin PQFP and compact 7mm x 7mm 44-pin QFN. An Evaluation Kit, ADK-8437, is also available from Holt on request.
About Holt Integrated Circuits
Located in Mission Viejo, CA, Holt Integrated Circuits is a major supplier of ICs for avionics and military data bus and display applications. The company’s products are specified by more than 400 manufacturers worldwide and are employed in flight control, navigation, engine management, communications, safety equipment, and in-flight entertainment systems.
Holt’s range of ICs supporting the ARINC 429 standard is the widest in the industry and its MIL-STD-1553 transceivers are recognized as the industry’s smallest, having the lowest power consumption. In addition, Holt MIL-STD-1553 integrated terminals offer the most compact, cost effective solution available, integrating protocol, transceiver and transformers in a single 15x15mm package. Other data bus products include ARINC 717, CAN (ARINC 825), RS-485/422 and analog switches. Select products are available to DSCC SMD specifications. Holt also offers product compliant to the European Union "RoHS Directive 002/95/EC".
Holt Integrated Circuits is ISO 9001:2008 registered and is a STACK certified supplier and winner of the STACK International 2012 Gold Supplier Award.