The HI-3587 from Holt Integrated Circuits is a silicon gate CMOS device for interfacing a Serial Peripheral Interface (SPI) enabled microcontroller to an ARINC 429 serial bus. The device provides one ARINC 429 transmitter with 32 X 32 Transmit FIFO and built-in line driver. Transmit FIFO status can be monitored using the programmable external interrupt pin, or by polling the HI-3587 Status Register. Other features include a programmable option of data or parity in the 32nd bit, and the ability to switch the bitsignifiance of ARINC 429 labels. Line driver output pins are available with different values of output resistance to provide flexibility when using external lightning protection circuitry. The Serial Peripheral Interface minimizes the number of host interface signals and provides a small footprint device that can be interfaced to a wide variety of industrystandard microcontrollers supporting SPI. Alternatively, the SPI signals may be controlled using four general purpose I/O port pins from a microcontroller or custom FPGA. The SPI and all control signals are CMOS and TTL compatible and support 3.3V or 5V operation. The HI-3587 applies the ARINC 429 protocol to the transmitter. ARINC 429 databus timing comes from a 1 MHz clock input, or an internal counter can derive it from higher clock frequencies having certain fixed values, possibly the external host processor clock.

Features

• ARINC specification 429 compliant
• 3.3V or 5.0V logic supply operation
• On-chip analog line driver connect directly to the ARINC 429 Bus
• 32 x 32 Transmit Data FIFO
• Programmable data rate selection
• High-speed, four-wire Serial Peripheral Interface
• Label bit-order control
• 32nd transmit bit can be data or parity
• Low power
• Industrial and extended temperature ranges available

Applications

• Avionics data communication
• Serial to parallel conversion
• Parallel to serial conversion